Related Stories

Bioproducts Testing and Evaluation Stories

FWRC Researchers Study 50 Years of Southern Yellow Pine Properties

FWRC Researchers Study 50 Years of Southern Yellow Pine Properties

Southern yellow pine is one of the most readily available softwoods in the U.S. and, due to its availability, performance, and affordability, it is used broadly in construction. Scientists in the Forest and Wildlife Research Center have conducted research to assess the flexural-tendency to bend or deform under load-properties of southern yellow pine from three samples that span over 50 years. Dr. Frederico Franca, assistant professor in sustainable bioproducts, specializes in non-destructive testing of wood products. He is part of a team that recently sampled and conducted tests on southern yellow pine and pulled data from specimens collected from the early to mid-1960s from the USDA Forest Service Forest Products Laboratory in Madison, Wisconsin. The team evaluated southern yellow pine's density, bending strength and stiffness, as well as compression parallel and perpendicular to the grain.

After comparing the clear wood flexural properties of southern yellow pine taken across approximately five decades, the researchers found an increase in some wood properties and stability, which helped confirm that southern yellow pine remains reliable, strong, and safe for structural uses. This research was supported by the USDA Agricultural Research Service, under agreement no. 58-0204-6-001, and the Forest and Wildlife Research Center.

2022

Knots Untangled

Knots Untangled

Researchers in MSU’s Forest and Wildlife Research Center hope to untangle how knots—remnants of where branches grew while the tree was alive—affect the stiffness and strength of this important commodity. The team set out to investigate the role multiple knots in proximity play on affecting lumber stiffness and strength to increase the value of southern pine. In a series of studies spanning several years, Drs. Rubin Shmulsky, professor and head; Dan Seale, professor; and Jason Street, associate professor, led a team of graduate students as they analyzed southern pine boards produced at a local Mississippi sawmill to determine if small clusters of knots impacted lumber stiffness and strength. The research’s goal is to find a more accurate way of measuring the mechanical properties of lumber so that a more particular strength rating can be associated with each piece produced.

This research was funded by the Forest and Wildlife Research Center and the USDA Forest Service Forest Products Laboratory in Madison, Wisconsin.

2020

Finding a Better Model

Finding a Better Model

In 2013, after several years of testing and reassessment, the design values for southern pine dimension lumber were adjusted, which affects the value of pine logs on timberland. Dr. Frank Owens, a sustainable bioproducts assistant professor, began working on a project with the help of his doctoral student to evaluate various statistical models to determine if, perhaps, there was a better model for lumber standards. The team has tested strength and stiffness of 2,000 specimens of mill-run 2x4 kiln dried softwood lumber from six U.S. sawmills. They have tested southern yellow pine from four Mississippi mills, and red pine and spruce from two northern mills. This research will ultimately provide a more accurate assessment of lumber strength and stiffness values brings about better stumpage prices and higher sustainability.

2019

Related Stories